:	May 9, 2007

.

Disconnect the battery ground cable.

.

Remove the battery tray.

.

Remove the LH exhaust gas recirculation (EGR) outlet tube.

.

Disconnect the LH EGR valve electrical connector.

.

Release the LH EGR cooler.   Remove and discard the clip.   Loosen the 2 bolts.

.

Release the LH EGR valve from the cylinder head.   Remove the 3 bolts.

.

Remove the LH EGR valve.   Remove the 2 bolts.   Remove and discard the gasket.

.

Install the LH EGR valve.   Clean the component mating faces.   Install a new gasket.   Tighten the bolts to 10 Nm (7 lb.ft).

.

:   Do not tighten at this stage. Install the LH EGR valve bolts.

.

:   Install a new clip. Secure the LH EGR cooler.   1) Secure the clip.   2) Tighten the bolts to 10 Nm (7 lb.ft).

.

Secure the LH EGR valve.   Tighten the bolts to 10 Nm (7 lb.ft).

.

Connect the LH EGR valve electrical connector.

.

Install the LH EGR valve outlet tube.

.

Install the battery tray.

.

Connect the battery ground cable.